Posted Tuesday, November 15th, 2022
You may not realize how often you use your garage door until something goes wrong. Keeping your garage door in good condition is important for your convenience and safety. Your garage door’s components will sometimes need to be replaced, including the rollers.
Your garage door should open and close smoothly. Your garage door’s rollers can become worn out over time. This causes your garage door to vibrate and shake excessively when it’s opening or closing. If your garage door seems like it’s going to jump off its track every time you operate it, it’s likely that your rollers need replacing. Has your garage door been checked out by a repair technician?
This is one of the easiest ways to tell that your garage door needs new rollers. The rollers help to keep the garage door aligned properly. It needs to stay in alignment in order to function correctly. If your garage door is frequently running off its hinges or slipping out of alignment, the rollers will need to be replaced.
When your garage door becomes excessively noisy, it’s usually a sign that something has begun to go wrong. Unusually loud noise can indicate that your rollers have become rusted. It may also mean that your garage door system needs to be lubricated. You should have your garage door examined by a service technician. They will be able to determine if your rollers need to be replaced.
If your garage door is in need of repairs, don’t wait. Garage door problems can become unsafe if they’re not addressed. If you think your garage door needs new rollers or any other repairs, give us a call at Cressy Door and Fireplace. Our expert technicians will be happy to assist you.
The importance of garage rollers cannot be stressed enough, and you should ensure that they are kept in reasonable condition at all times. It will make your property and life much easier in the long run. It is always a good idea to change your garage rollers regularly. It will help extend the life of the device and keep it working correctly, but how do you know if your garage rollers are bad?
Rust
Suppose you notice parts of it rusting or becoming unstable. It would be best if you got them replaced before the situation gets out of control, as this could lead to significant structural damage. They can create extra friction, which could fool the control system into thinking that it has already hit the floor.
If you have seen sharp edges developing on the metal pieces and the general appearance of the device.
Proper maintenance, lubrication, and inspection can prevent expensive problems later. If you observed the listed alarming indications mentioned above on your garage rollers, you might contact us for any of your garage door repair needs. Rest assured that we at Cressy Door & Fireplace will provide you with the highest-quality service.
If you find that the rollers squeak loudly or make tons of noises when they move, then you may have used them too tightly, or some parts are worn, loose or other components need to be lubricated.
Generally, they should move at a speed of about seven inches per second. If you notice a sudden increase or decrease in the rate at which the rollers move, you probably misuse them, or grime builds up on parts, or the lubricants wear off.
The Residential Seattle Garage Door Team at Cressy Door and Fireplace is available Monday through Friday from 7 am to 4 pm. We are happy to assist you with your questions relating to sales, installation, maintenance, and repair of your home’s garage doors in the Seattle, Tacoma, Bellevue, Kent, Everett, and Renton areas. Please give us a call or fill out the form to the right, and one of our Residential Team members will respond promptly.
If you have a garage door emergency, give us a call 24x7x365 and we’ll send one of our certified Seattle home garage door repair technicians to assist you.
Kent (253) 887-9135 Shoreline (206) 632-0533
Serving the Puget Sound Community since 1952.