Facilities that require a quality door that installs quickly, operates dependably, and requires minimal maintenance. Like the other doors of our rolling sheet door line, this 26-gauge door features quick-connect components that simplify and speed installation while ensuring door sturdiness. Stepped counterbalance rings and a unique curtain profile ensure a tight curtain wrap resulting in a smooth operating door and minimal nesting. A host of other standard features from standard roller bearings and dual rub strips on both guide edges and both front edges of the curtain further promote smooth operation and longer life. Available in 11 standard colors, the Model 770SS represents a good choice and a good value.
Max. standard width
10′ (3048 mm)
Max. standard height
10′ (3048 mm)
Curtain
26-gauge, roll-formed, galvanized steel sections interlocked and seamed to form full door height
Curtain material
High strength steel
Curtain rub
strips PVC on both front edges
Counterbalance
assembly 9″ (229 mm) steel “stepped” rings to minimize headroom and enhance door operation
Universal guides
18-gauge, roll-formed galvanized steel, pre-punched to accept quick-connect components and with through-hole design for mounting to concrete, masonry, steel or wood jambs
Quick-connect headplate
14-gauge steel, quick-connect design with roller bearings
Bottom bar
Extruded aluminum reinforced with steel, roll-formed angles
Quick-connect
stops 14-gauge galvanized steel
Bottom seal
Bulb-type, astragal seal
Guide rub
Polypropylene strips on both edges
Standard springs
3 3/8″ (86 mm) torsion springs
Operation
Manual push up center handle with side step plate, and center rope attached to bottom bar
Lock
Interior bottom bar slide bolt on each end of bottom bar assembly
Exterior/interior finish
Paint finish in choice of 11 standard colors: white, glossy white, garnet red, royal blue, polar blue, forest green, desert tan, dark teal, teal, walnut brown and bronze